Dale Preciado asked 1 เดือน ago
BMW Ghost Immobiliser
The Ghost utilizes the CAN data bus to communicate with your vehicle. This stops thieves adding keys or replacing the ECU to get around your security system because it requires a correct PIN code to begin the engine.
The Ghost is unlike other immobilisers in that it doesn’t rely on key fobs or LED indicators. Instead, it makes use of your vehicle’s existing buttons to allow you to enter a specific disarm sequence that only you know.
Stop & Start
If you’ve been in a BMW or used its stop-start feature you might have noticed that the engine continues to run for about 30 seconds after you release the brake pedal. The BMW engine management system continues to watch the vehicle for a signal coming from the ignition key. When it detects this, the vehicle will continue to run. The Autowatch 2 Ghost immobiliser prevents this from happening by stopping the car whenever you push a button sequence.
Our BMW ghost immobiliser is a unique next-generation device that does not require cutting OEM wires or adding an aftermarket alarms and key fobs. It is connected to the BMW CAN data network, and is programmed with an unique PIN code that can be accessible via buttons in your car. This allows you to enter key sequences that aren’t accessible through the standard menus for media. For example, volume up/down or source, cruise control, air conditioning etc. The PIN can be between 4 and 20 numbers which makes it extremely difficult for thieves to determine or break.
In addition, we can also add a service / valet mode to the system, this is activated when the car is being serviced to ensure that the Ghost is not visible to the garage. This can be done by pressing the service button on your infotainment device 5 times (the system will flash to confirm this) and when you return the Ghost will automatically arm again.
With high-end vehicles becoming more targeted than ever, we highly recommend the Ghost immobiliser to be installed. It is completely unnoticeable and doesn’t require cutting any original factory wiring and can disable the engine of your vehicle when the wrong pin code is entered. It is a simple but effective method to stop your vehicle from being stolen, even with keys that are cloned. Check out social media sites to see just how quickly new vehicles can be stolen by using tools for cloning that are available online for less than PS80.
Service / Valet Mode
The ghost immobiliser price is a market-leading immobiliser that is designed to protect your vehicle from being taken by key cloning or hacking. It uses the factory buttons on your vehicle to create a unique push sequence that only you know. This is similar to the pin code security on your mobile phone. Its discreet and incredibly effective and dissuading even the most determined thieves from ever trying!
If you are parked at home or in an event where you meet and greet, when you are at a meet and greet, the Ghost can be switched into service mode, which allows you to start your vehicle using your keys in the normal way, but stops the engine from being started until the correct code is entered. This is a great option for those who need to hand their vehicles over to valet services or other trusted friends and family members. It also allows you to get the car into the garage for maintenance or repairs without having to worry about it being tampered with or stolen by a mechanic whilst you wait.
Once the valet or service mode is enabled, it will stop your BMW from being driven after it has been started. This prevents anyone from testing while you are away. After you return, it will revert back to normal driving, stopping your car from being tampered with or stolen again.
We can install the Ghost to any BMW, all you need is the right keys as the device doesn’t use the original remotes, and can be used in conjunction with them. We are TASSA registered, DBS security checked and fully system trained to ensure you are assured of the quality of our installation and that your new Ghost device will function according to the specifications. Your car will also be registered on a database and you will receive a document that you can present to your insurance company, they love these devices and often receive significant discounts!
If you do not want to use a smartphone or are not comfortable using it, we can provide an optional Bluetooth tag that can be used to turn off the Ghost. This is an additional expense and requires a new Bluetooth pairing.
Anti-Hijack
ghost immobiliser Car (qooh.Me) developed this discreet device that is obtrusive, and unobtrusive to fight the ever-increasing sophistication of high-tech thieves. It is designed to prevent thieves from adding a new key or replacing the ECU in order to start your car and drive it away. Ghost connects to your CAN network, and uses buttons on your vehicle to create an individual push-sequence that has to be entered before the engine can start.
This will activate the anti-hijack mode and, once it is activated, any attempt to start the engine will be blocked. Once the system detects that the vehicle is no longer moving, it will honk the horn and flash the indicators, in case it fails to locate the correct code, it will also stall the engine (where it is). The Anti-Hijack feature is removed by entering your push sequence or by enabling service mode, which allows your car to temporarily start and drive without needing to enter your PIN.
If you have a GPS device that is connected to your BMW it is possible to make use of it to disable the Anti-Hijack function so that you can continue to navigate using your navigation system even when the vehicle is stationary. You can also use your mobile phone to control the anti theft feature, as well as other functions.
This is an Tassa verified product and is recognized by the majority cost of ghost immobiliser insurance companies. It can help reduce the chance of your treasured possessions being stolen. It is completely discrete and will not interfere with the functionality of your vehicle. It does not require any programming expertise to install or use. It is completely undetectable by the tools for detecting that thieves use and it is totally immune to key cloning as it is directly connected to your vehicle’s CAN data network.
Remote Control
We can connect the Ghost device with your mobile app to enable remote control of keyless start and go functionality. This is useful when mechanics or valets need to start your car, but you are other where. The system lets you start your car, select drive and quit the service mode without the need to use your key fobs. You can also track your vehicle on an interactive map on your smartphone.
The Ghost can be placed under the dashboard or within the centre console, it is completely secure and untouchable and does not require additional wiring. The device is connected to CAN Data Network of the vehicle (similar to Ethernet cable) and a personal pin code is inserted into it. The pin code must be selected prior to the engine starting. This prevents thieves from using a cloned key or replacing the ECU to get around this system.
If the vehicle is stolen in any way, the ghost immobiliser tracker will enter a security mode and shut down all functions until the PIN code is entered or you make use of the mobile app to disarm it. This feature was developed to protect your vehicle from thieves using high-tech devices who use relay boxes to take it. It also stops thieves from being able to use their mobile phone to activate your sat nav or MP3 player to track your car!
Ghost also blocks ‘Relay-style Frequency Amplification’. This is the most frequent method of preventing a vehicle from being stolen with a key-fob that has been cloned or stolen via hacking. Ghost enables you to prevent this by installing an anti-theft device within your vehicle that is called Secure-A Key. The device is inserted into your vehicle’s key-fob and removes the battery after a few minutes of inactivity, this can be done on the majority of modern PKE key-fobs.
We are TASSA accredited (Tracking And Aftermarket Security Systems Association) A recognized body that some insurance companies acknowledge and provide discounts for when you fit the device. We are also DBS security-checked and fully system trained to install the Ghost and ensure that all work is carried out to the highest standards. After installation, you will be provided with a certificate to take to your insurance company as proof of installation, allowing you to get the best possible deal on your car cover.
