Tayla Comstock asked 2 เดือน ago
Ghost Immobiliser Installation
Guard your precious possessions from thieves by adding a ghost immobiliser. Our TASSA-certified system guards against hacking, key cloning and bypassing the vehicle immobiliser.
The system is hidden in the wiring loom of your vehicle and is inaccessible to anyone looking. It works by generating pin code push sequences by using existing buttons on the steering wheel, door cards, and centre console.
No circuit cuts
It’s not surprising that owners are concerned about protecting the vehicle they’ve put so much effort into buying. However, traditional security devices like wheel locks and alarms can easily be cut off or jumped by thieves. Ghost immobilisers are very effective and efficient solution that operates in silence and fitting isn’t recognized by modern day thieves.
A ghost immobiliser or a hidden device is a device that connects to the data network of your vehicle’s CAN to shut off the engine. It does this without using key fobs or radio frequencies. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This generates a unique pincode that is only accessible to you. The code can be altered at any time and can have up to 20 digits based on your preference. It also comes with a safe emergency code you can use should you forget your PIN.
The ghost immobiliser is also useful to prevent the relay box inside your home from transferring the signal of your car key, which will open the doors and start your vehicle. It can even block new advanced methods of stealing your vehicle, such as OBD port hacking. The device is small, weatherproof and difficult to detect. It’s also very difficult to alter.
The ghost immobiliser also has an benefit: it can be installed in your vehicle without leaving any permanent marks. This is ideal for those who are planning to resell their car in the future. It’s also quicker and simpler to install than an original factory-fitted system.
The Autowatch Ghost is a groundbreaking next-generation device that blocks theft of cars using contactless technology by connecting to the vehicle’s CAN data network and using the existing buttons to generate a unique PIN. This is a hidden device that can be set up without severing any wires and does not require any additional key fobs. It also connects to the original ECU of the vehicle, thus preventing thieves from bypassing it with a new key. This system is TASSA verified and can be connected to an International Security Register, allowing owners peace of mind knowing their vehicles are secure from theft.
No scanning with RF
You’ll want to secure your vehicle from theft if you have spent a lot of money and spent a lot of time customizing it. Installing an immobiliser is one of the best ways to prevent theft. It will stop your vehicle from starting until you enter a unique code. By using the buttons on your steering wheel as well as the dashboard, you can create a PIN up to 20 digits long which is only known to you, making sure that only you can drive your vehicle. It is also possible to set up a service and valet mode, which will allow you to start your car temporarily without entering the PIN code. This allows your technician to work on your car without you being there. This is a fantastic feature for people who are looking to save time and make their life easier.
Ghost immobilisers, which are new generation device, connects to the CAN data network of your vehicle and uses the buttons located on the dashboard and the steering wheel to program a PIN code. It is designed to be discreet and has no LED indicator or noise to make it obvious and can be installed anywhere on the vehicle, without impacting the look of your beloved vehicle.
This stealthy system is TASSA approved and can cut down on the cost of insurance. It also has a tracking function, which can locate your vehicle even if it has been stolen. This is a great feature for those who own a unique, expensive vehicle that you’ve spent a lot of effort customizing.
Autowatch Ghost, in conjunction with the iPhone application, allows you to remotely start your car in the event that you’ve forgotten your PIN or are not able to enter your vehicle. This feature is ideal if you need to pick up the kids or go on errands, but don’t want to put yourself at risk by letting having someone else drive your vehicle. This feature is beneficial when you need to take your vehicle in to be repaired or serviced.
Another advantage of the ghost 2 immobiliser reviews is that it is unable to transmit or detect radio frequency signals, which makes it unnoticeable to thieves who employ RF scanning or code grabbing technology. It can also safeguard your car from key copying, ECU swapping and other common methods of car theft.
There is no key to cloning
Ghost immobilisers can be a great way to protect high-end cars and prevent key cloning. They stop your car from starting until an additional PIN code is entered in conjunction with the regular key fob. This makes it extremely difficult for thieves to rob your vehicle, and may discourage them from attempting it initially. This is a great idea if your vehicle has been heavily customized or if it is an uncommon model.
The immobilisers are connected to the vehicle’s onboard CAN data network and are completely hidden, which means there is no indication of its presence within the vehicle. It is also impossible for thieves to locate the device using radio frequency scanning or code grabbing technology. This means that a burglar must spend a lot more time in order to get your vehicle.
To bypass the system thieves need to know the unique pin code and the location of the Ghost. The pin code is unique to you and you can alter it as many times as you want. The pin code is easy for you to remember but mathematically unattainable for someone else to understand. The engineer will also provide an emergency pin number in the event that you forget the pin.
The Ghost CAN bus immobiliser is weatherproof, and can be installed in any part of your vehicle. It is compatible with all vehicles and completely customizable to match the look of your car. It is also extremely cost-effective and simple to use. The device can be transferred to another vehicle, provided that it is compatible with the new vehicle.
The CAN bus can be used with other security features. For instance, it can detect the damage to your vehicle and notify the owner. It could also stop the engine if the car is tampered with. The system can also protect your vehicle from key cloning and hacking. It can also detect vibrations or contact with the vehicle. It will also notify the owner when the vehicle is moved.
No OBD port hacking
ghost immobiliser review employs an immobiliser that is hidden and connected to the CAN data network in your vehicle which prevents a thief from gaining access to your vehicle to disable the alarm, turn off the key fob and code new keys. This technology is a major improvement on traditional methods that have been used by thieves in the past to steal your vehicle. The CAN data network also means that your system will not be affected when you disconnect or change your battery.
The Autowatch Ghost is the first aftermarket CAN bus non-detectable immobiliser that protects against key-cloning, hacking, and replica car theft. It does not use LED indicators or key fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.
Modern thieves use diagnostics to detect cuts in the circuit on your vehicle. They can bypass immobilisers that require a large amount of wiring or are integrated into the wiring. The ghost immobiliser car is weatherproof, does not require additional wiring and cannot be detected by diagnostic tools of a professional. It can be even installed on vehicles equipped with anti-theft equipment.
A ghost immobiliser near me immobiliser comes with a major benefit: your car can only start by someone who knows your PIN and has physical access to your vehicle. This is a big advantage over security systems that are able to be bypassed using cable alteration, a screwdriver or the use of an universal remote controller.
If you forget your PIN you can easily reset it with the emergency PIN override function on a mobile phone or computer. This is a great option if you need to start your car when it’s been left in a garage or valet parking.
The Autowatch Ghost 2 is the latest generation of the product and is approved for insurance by TASSA when installed by one of our authorised installers. It comes with an RFID fingerprint system that can identify individual parts that allows for the return of stolen items in the event that they are discovered. It can also be switched to’service mode’ which permits the engine to be started when your car is parked in a garage or with valet parking, however, you must enter your PIN code once more to exit the vehicle.
